Technisat TechniCorder ISIO STC Bedienungsanleitung

DiSEqC1.2Quick Start ManualTechniCorder ISIO STCDigital Multituner HD Receiverwith Internet AccessWith CONAX cardreader and an interface for recordin

10f. After successfully installing the tuner module, continue with section 3.2 (Using an optional tuner module) or section 4 (Connecting the DVB rece

113.3 Optional IsiZapper remote controlIsiZapper (item no. 0000/3773) is an optional remote control device which is specially designed for operation o

124 Connecting the DVB receivera Network connectionb LNB 1 connection to LNB Input 1 on the DVB receiver. (Please note: the LNB must be connected wi

13When using an optional DVB-S tuner module for operation with four antenna signals:h Additional connection for LNB 3 to the LNB Input 3 on the DVB r

144.1 Mains power connectionThe digital receiver should only be connected to the mains power supply once you have fin-ished making all the connections

15Also see section 8.6 (DVB-S antenna setting) in your operating manual. It is not possible to receive analogue TV via the cable or antenna!4.2.3.1 S

164.5 USB portThe USB port is used for updating the operating software and to transfer data.You can also use the film, music and image playback functi

175 Basic operationDear CustomerThe following section starts by covering basic operation as well as recurrent operating steps for the TV. This should

185.2 Calling up the main menu and navigating through the menus /functionsThe following example will illustrate how you reach the main menu and call u

19> Use the up/down arrow keys to highlight the Picture settingsitem.> Then press the OK button to open the Picture settings menu. You can al

2Dear Customer,Congratulations on your decision to purchase the TechniCorder ISIO STC.The operating manual supplied is intended to help you to utilise

205.3 Accepting settings / Exiting menus and functionsIn some menus and functions the changes made must be accepted manually in order to save them per

215.4.1 Arrow selection method> If is shown on the left and on the right next to the set value, you can alter this using the left/right arrow ke

225.4.3 Entering numbers> Use the numeric key pad to enter the new setting which you require if a question mark or a numeric value is displaye

23The SMS keyboard is operated using the numeric keys on both the alphabetical and the QWERTY keyboard and can be used at any time. The coloured butto

24> Every additional press of the Options button moves the highlight down one line each time. Some options are selected directly in this window.

256 Initial installationAfter you have read the safety instructions and connected the receiver as described in sec-tion 4, you can then switch it on a

26Menu language> When the installation wizard is launched, the selection window for the operating language opens first.> Use the arrow keys to

27 The picture format on the TV will be automatically adjusted according to your selec-tion.> Press the OK button to accept the selection.Selecti

28> Use the right/left arrow keys to select whether you have connected1,2,3 or 4 DVB-S antenna signals.> Press the OK button to accept the se

29During this step, a channel spectrum is displayed with the channel signal levels. Using this spectrum, you can align your DVB-T antenna to achieve o

3TechniSat hereby declares that the TechniCorder ISIO STC device complies with the funda-mental requirements and any other relevant stipulations of Di

30> Use the up/down arrows to select whether you want to configure a LAN or WLAN network and press the OK button.> Now perform the network set

31arrow keys to highlight the All channels or All unencrypted channels and then start the channel search process by pressing the OK button. In this s

32Software updatesThe digital receiver will now check whether a new version of the software is available for the receiver. If a new software version i

33> If you do not want to wait for the current ISIO internet list to be downloaded, you can skip this process by pressing the Info button.watchmiI

34> Use the up/down arrow keys to move through the general terms and conditions page by page.> Use the right/left arrow keys to make a selecti

35> Use the up/down arrow keys to move the selection bar over the channels and select the highlighted channels with the OK button. The selected ch

36 If the EPG update has been skipped, your unit will download the EPG data automati-cally at the time set as per section 15.2 in your operating manu

377 Operating the unit7.1 Switching on> Switch the digital receiver on by pressing the On/Standby button on the receiver or on the remote control.

38> You can view additional data about the current programme by pressing the INFO button.7.4.3.1 Selecting the channel> You can now highlight

397.4.6 Returning to last channel selected> Press the Back button on the remote control to return to the last channel selected.> Press the but

41 IllustrationsRemote control codeOn/Stand-bySound on/offNumeric keypad keysRecordingEPGPage upBackTV/Radio modeRewindInfoFast forwardChannel +/-Volu

407.5 Receiving encrypted channels> Insert the CONAX Smartcard into the card slot in the integrated card reader. (gold-coloured chip facing down,

41 After a few seconds the box appears at the lower right of the screen indicating the availability of HbbTV content.> Launch the HbbTV applicati

424: The current date and the current time.5: Broadcasts of the displayed programme.> Use the right/left arrow keys to adjust the display time e

4310 Function Selection> Press the Navigator/Function Selection button to open the Navigation menu (NAV menu) in order to select the desired funct

4411 Using the Internet list to call up websites> In normal mode, press the WWW button twice or > If a website has already been opened, press

45> To continue playing back the programme from this point, press the Play / Pause but-ton again. You are now watching the programme with a time

4613 DVR playbackYou can access DVR recordings via the DVR Navigator. 13.1 Calling up the DVR Navigator / Starting DVR playbackThe DVR Navigator can b

4713.5 Pause / Freeze frame> To pause playback of a recording (freeze frame), press the Pause / Play button during playback.> Press the Pause

4814 Encryption systemFrom this menu item you can access the submenus for the connected Smartcards and the CI-/CI+ modules.> Call up Main Menu >

4915 ISI modeA wide range of functions and added value options make television with TechniSat an amazing and complex experience with unlimited possibi

5Front of unitRear of unitLNB 1 inputLNB 2 inputLoop outRF inAudio outputs analogue/digitalTuner slotMains power connectionUSB portsHDMI outputSCART s

501 for channel slot 11, then 4 for channel slot 142, then 3, then 4 for channel slot 2341, then 5, then 6 then 7 for channel slot 15

51> Press the OK button to confirm the selection and switch to selected operating mode. The unit switches to the last radio channel set.15.4 Volu

52 As the Teletext pages cannot all be transferred by the broadcaster at the same time, it may take a few seconds before the page is displayed. This

5316 Software updates via USB interfaceIn addition to the automatic software updates via the internet and DVB sources, you also have the option of upd

5417 Troubleshooting guideFault Possible cause SolutionRemote control does not workIncorrect remote control code has been setSet the correct remote c

55Fault Possible cause SolutionCannot receive channels that were previously recei-vedAntenna defective or not correctly adjustedCheck antennaChannel

56Fault Possible cause SolutionReceiver cannot be operated, switched on or offDefective data stream --> receiver blockedHold down the On/Stand-by

57 Fault Possiblecause SolutionPC cannot connect to recei-ver;Receiver cannot connect to networkIncorrect network settings Check network settings (se

58Your TV bears the CE symbol and complies with all requisite EU standards.Subject to change for amendments and printing errors Version 10/14Duplicati

59

62 Please read this firstBefore connecting and using the device, first check that everything has been supplied and familiarise yourself with the safet

60

6141411. Register your products within four weeks of purchase - either by sending in your completed registration card (see reverse) or online at www

624242TechniSatGuarantee certificateWarrantyDear Customer, You have purchased a high quality TechniSat product that has been put through multiple qual

634343The warranty can only be invoked if:1. the fully completed registration card has been received by us no later than 4 weeks after purchase, or y

6444Service Report in the event of a claim under warrantyIf, contrary to expectations, you encounter a problem with your equipment, despite the ultra-

7 - Never open the receiver housing under any circumstances!! You risk receiving an electric shock. Any necessary repairs to the receiver should onl

82.4 Important information on data securityBefore handing your receiver over to your supplier for maintenance purposes, we recom-mend that you remove

93 Optional HardwareYour DVB receiver can also be equipped with optional hardware, such as various tuner modules and an internal 2.5” hard drive.3.1 I